816 LA Actuator
INSTALLATION REFERENCE MANUAL
7
IMAGE 2-1:
ACTUATOR INSTALLATION
2
MOUNT ACTUATOR TO PIVOT ARM
LOCK
NUT
ACTUATOR
BOLT
PIVOT
ARM
WASHER
1. Mount the actuator to the pivot arm as shown (IMAGE 2-1). Note that the washer goes above the ac-
tuator flange.
2. Tighten the lock nut to prevent movement or shifting when the actuator is running. This will also pre-
vent excessive “bounce” or “wobble” when the gate stops moving.
www.ApolloGateOpeners.com | (800) 878-7829 | [email protected]