816 LA Actuator
INSTALLATION REFERENCE MANUAL
13
IMAGE 7-1:
816 EXISTING CONNECTOR & BATTERY LEADS ON 816 ACTUATOR CABLE
ACTUATOR CONNECTOR
BATTERY
LUGS
REMOVE CONNECTOR FOR WIRING TO 936/1050
When wiring the 816 actuator to the 936 or 1050 control boards, it is necessary to cut off the existing
actuator connector and battery wires (IMAGE 7-1).
1. Cut off the connector per IMAGE 7-2.
2. Discard the connector and the red and black battery wires (with lugs).
CUT OFF HERE
8-PIN CONNECTOR
EXISTING SPLICE
SECTION 5: ACTUATOR TO CONTROL BOARD CONNECTIONS
8 - RED
7 - BLACK
2 - ORANGE
1 - WHITE
6 - N/C
5 - GREEN
4 - RED
3 - BLACK
IMAGE 7-2:
CUT OFF EXISTING CONNECTOR & BATTERY LEADS
FOR WIRING TO 936/1050 CONTROL BOARDS
7
www.ApolloGateOpeners.com | (800) 878-7829 | [email protected]
