HyQuest Solutions iLevel-GW, User Manual

Page: 9 / 24

© 2022 HyQuest Solutions 9
Configuration
3
Configuration
The software HyQuest Solutions GP shell is used for local communication between a PC and the iLevel-GW data logger. For
the communication, a 433 MHz radio link is used. Using HyQuest Solutions GP shell, the parameters of the logger can be
configured and measured values are shown directly.
Please install the HyQuest Solutions GP shell before you connect the dongle to the PC for the first time! The drivers
needed for the installation of the dongle are installed with the HyQuest Solutions GP shell.
Please use the supplied CD or download the latest version of the software from the customer homepage. Double-click the
*. Exe file to start the installation. When the installation was successful, click "Exit Installation".
This chapter contains the following subsections:
§
Functions / Settings
§
GPRS / GSM Setup
§
Two Point Calibration
§
Tare
3.1 Functions / Settings
The start window of the shell is divided into 3 areas:
§
Menu with buttons
§
Main window with current information
§
List of available loggers
§
Setup
§
Service
§
Main Window
§
Parameters
§
Scale
§
More Buttons
9
14
15
16
10
10
11
12
13
13