Hypertherm Echion, Operator'S Manual

Page: 51 / 194

Operation
2
Echion Operator Manual 810770 51
Op
e
rat
io
n
Emergency stop
Use the emergency stop to stop the controls immediately to prevent injury or to reduce the risk of
injury to personnel, machinery, or work in progress.
This is not the preferred method of turning
off the pump.
On the operation panel, push the EMERGENCY STOP button.

The control circuit turns off, which turns off the pump, the primary motor, and the intensifier.

Remote controls that are wired to the pump controller turn off.

The bleed-down valve opens to release high-pressure water from the system.

The supply-water valve closes to stop low-pressure water from entering the system.
WARNING
The EMERGENCY STOP button does not disconnect main electrical power from the
machine.
The EMERGENCY STOP button must be reset before the equipment can be turned on.
Turn the button clockwise until it releases.