Hypertherm Abrasive pot, Instruction Manual

Page: 31 / 36

Abrasive pot
Instruction
Manual 809080 31
5 – Troubleshooting
Tr
o
ubleshooting
To remove the bowl, twist the regulator bowl anticlockwise (toward the unlock symbol), then pull the bowl off of the
regulator. Wipe the inside of the bowl with a clean, lint-free towel.
The low-level sensor is out of adjustment
The low-level sensor is set at the factory to monitor the abrasive level. The low-level sensor can stop sensing
accurately if it is out of adjustment.
To adjust the low-level sensor, refer to the low-level sensor’s manufacturer’s instructions or contact a Hypertherm
Technical Service Associate for assistance.