manualshive.com logo in svg

Hypermedia HG-4000 3U, Product Manual

Share
Download
Hypermedia HG-4000 3U Product Manual Download Page 59

HMC 

Product Manual 

49

Release 3.4:   May 2010

CLI Blocking

CLI Blocking

Use the Calling Line Identification (CLI) Blocking screen to hide the caller’s phone number 
from the person receiving the call.

Note:  

Some operators do not allow CLI Blocking.  In some cases, if the CLI is blocked, the 

call does not go through.  Check the operator’s policy.

To block CLI:
1.

From the Cellular Cards branch of the HMC navigation pane, click the 

CLI Blocking

 

sub-branch.  The CLI Blocking screen is displayed.

              

Figure 45: HMC Cellular CLI Blocking Screen

2.

If more than one slot is displayed, select a specific Cellular Card.  The CLI Blocking 
screen of that cellular card is displayed.

3.

Use one of the two options: 

Card 

•

Block

  

Click 

Block

 to block CLI for all 4 of a card’s SIM modules.

•

Unblock

  

Click 

Unblock

 to allow CLI for all 4 of a card’s SIM modules.

Module

•

Block enforced

  

Select 

Block enforced

 to block CLI for a specific SIM card.

•

Block not enforced

  

Select 

Block not enforced

 to allow CLI for a specific SIM card.

4.

Click 

Apply Settings

 and wait for 

Configuration Saved

 to be displayed.

Summary of Contents for HG-4000 3U

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands