HMC
Product Manual
24
Release 3.4: May 2010
HMC Navigation
HMC Navigation
The Navigation Pane includes the branches and sub-branches from which access is gained to
the configuration, monitoring, management, and Save/Load panes.
Table 6: Summary of the Navigation Pane Branches and Sub-branches
Branch and Sub-branch
Uses
Configure > SMS Server
Open the SMS Server branch to configure SMS settings,
channels, and Advanced Call Routing (ACR).
Configure > Cellular Cards
Open the Cellular Cards branch to configure parameters
controlling the cellular service. These parameters
include, for example, volume control and PIN codes.
Configure > LCR Cards
Open the LCR branch to configure Least Cost Routing
(LCR). Gateways with LCR route calls based on rules
created by the administrator. This results in per-call
routing. In contrast, when using gateways without LCR,
all call routes are fixed.
Configure > PRI Cards
Open the PRI Cards branch to configure parameters con-
trolling the connections between the digital PBX and the
Hypermedia Gateway and to configure the associations
between PRI channels and cellular cards.
Configure > BRI Cards
Open the BRI Cards branch to configure parameters
controlling the connections between the digital PBX and
the Hypermedia Gateway and to configure other param-
eters and settings affecting the BRI connection.
Configure > VoIP Cards
Open the VoIP Cards branch to configure connections
from a VoIP card to other cards and channels in the sys-
tem and to configure VoIP parameters.
Configure > Server Settings
Open the Configure > Server Settings branch to config-
ure the Hypermedia PRI Server’s IP address and the
Hypermedia Management Console’s password.
Configure > Save/Load
Open the Save/Load branch to store settings, save an
existing configuration, restore a saved configuration,
and delete a configuration.
Monitor > Cellular Cards
Open the Monitor > Cellular Cards branch to view the
quality of the cellular card reception and their status.
