manualshive.com logo in svg

Hypermedia HG-4000 3U, Product Manual

Share
Download
Hypermedia HG-4000 3U Product Manual Download Page 110

  

HMC 

Product Manual 

100

Release 3.4:   May 2010

VoIP Media Connections

VoIP Media Connections

Use the Media Connection screen to configure the connections from a VoIP card to other cards 
and channels in the system, including the Cellular cards (CG) and the PRI cards (E1).  The 
matrix can be configured in any combination. 

Associating/Linking VoIP Channels

To associate a VoIP channel with another media channel:
1.

From the VoIP Card branch of the HMC navigation pane, click the 

Media Connections

 

sub-branch.  The Media Matrix is displayed.

              

Figure 96: HMC VoIP Card Media Matrix Screen

2.

If more than one slot is displayed, select a specific  VoIP card.  The Media Matrix of that 
VoIP card is displayed.

3.

Click within a channel row.  The row turns yellow.

4.

Click 

Edit

.  The row becomes configurable.

              

Figure 97: Media Matrix Row when Configurable

5.

From the first dropdown list, allocate this channel to a card by selecting the card.

Summary of Contents for HG-4000 3U

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands