manualshive.com logo in svg

Hypermedia HG-4000 3U, Product Manual

Share
Download
Hypermedia HG-4000 3U Product Manual Download Page 42

  

HMC 

Product Manual 

32

Release 3.4:   May 2010

Media Connections

Media Connections

Use the Media Connection screen to configure the connections from the channels of a Cellular 
card to other cards and channels in the system, including the PRI cards (E.1) and the VoIP 
cards (MG).  Connections can be either static or dynamic, as in the case of LCR. 
For example, you can assign each cellular channel to a specific E1 channel.  In this case, every 
time there is an incoming call from a specific E1 channel, it will be routed to the configured 
channel on the cellular card and vice versa.  

Note:  

The matrix can be configured in any combination.  Routing can be assigned between 

any cellular channel and any other channel in the system, including other cellular 
channels.

Associating/Linking Cellular Channels

To associate a cellular channel with another media channel:
1.

From the Cellular Cards branch of the HMC navigation pane, click the 

Media Connec-

tions

 sub-branch.  The Media Matrix is displayed.

              

Figure 23: Cellular Media Matrix screen

2.

If more than one slot is displayed, select a specific cellular card.  The Media Matrix of that 
cellular card is displayed.

3.

Click within a channel row.  The row turns yellow.

4.

Click 

Edit

.  The row becomes configurable.

              

Figure 24: Media Matrix Row when Configurable

Summary of Contents for HG-4000 3U

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands