HMC
Administrator’s Guide
5
Hardware and Installation
Release 3.4: May 2010
System Components
•
The
D-LINK DIR-100
is an Ethernet Broadband Router equipped with NAT network
address translation technology. It enables the Hypermedia Gateway to connect to a public
IP and to operate behind firewalls equipped with Network Address Translation (NAT);
this provides maximum network security.
•
The
HyperGateway Server
is an application that is embedded in the Control Board, the
PRI 2.1 board, and on the PC1/2 board. The HyperGateway Server is controlled and man-
aged by the browser-based Hypermedia Management Console.
•
The
Hypermedia Management Console
(HMC) is used by the system administrator for
remote configuration and monitoring of the Hypermedia Gateway system. It runs over
TCP/IP and is accessed via a standard WEB browser.
Table 1: Hypermedia Gateway Boards
Board Name
Description
CB1/2
Control Board
The CB1/2 module is designed for remote TCP/IP access, advanced
application and enhanced new features. It comes in two configura-
tions:
•
Stand-alone embedded HyperGateway Server for some dual-
PRI configurations (single PRI with the HyperGateway Server
runs on the PRI 2.1 board mentioned below)
•
VoIP Gateway add-on supporting the VoIP interface and provid-
ing a SIP/H323 interface
PC1/2
Control Board
The PC1/2 is a double-slot computer designed for use by alternative
carriers. It enables TCP/IP access and supports the VoIP Gateway.
The PC1/2 runs the HyperGateway Server for direct remote access,
and provides a SIP/H323 interface when VoIP is implemented.
CG41/CC41
Cellular Gateway
CG41 for GSM and CC41 for CDMA is a single-slot card that
enables inbound and outbound cellular voice calls for GSM and
CDMA networks.
QBRI
Quad BRI Board
The QBRI boards are single-slot cards that enable signaling over a
BRI channel on public or private ISDN. The HyperGateway Server
runs on the single QBRI board.
