OPERATION
When you wish to change settings in the program press the START/ENTER. Once the
text is blinking then you may change the value by pressing the DEC and INC button. Your
settings will be saved by re-pressing the START/ENTER button.
When you wish to start the Charging progress, press and hold the START/ENTER button
for 3 seconds. If you wish to stop your charging process and go back to previous
step/screen, press the MODE/STOP button once.
By default the charger menu will resume at the LiPo BALANCE CHARGE setting. If you
wish to select another mode then navigate to the desired mode by using the INC or DEC
buttons until you reach your desired mode
If you wish to select another type of battery rather than the LiPo Battery then press the
MODE/STOP button to enter into BATT PROGRAM screen, this is where you can select
the battery type..
MODE Button:
Is used for selecting the MODE of the battery type to charge, it is also used to STOP the
charging progress or go back to previous screens.
-
(Decrease) Button:
Is used to navigate through the menus and decrease the settings value.
+
(Increase) Button:
Is used to navigate through the menus and increase the settings value.
ENTER Button:
Is used to enter value settings, and also START charging.
09 ·
Hyperion EOS 0840i
Summary of Contents for EOS 0840i
Page 1: ...Hyperion HK Ltd 2016 ...
