EN
TO REDUCE RISKS OF ELECTRIC SHOCK, FIRE, AND PERSONAL
INJURY, OR PROPERTY DAMAGE, THIS DEVICE MUST BE USED IN
ACCORDANCE WITH THE FOLLOWING WARNINGS, CAUTIONS, AND
SAFETY INSTRUCTIONS.
IMPORTANT SAFETY
INSTRUCTIONS -
ORIGINAL INSTRUCTIONS
Read all instructions before using the Vyper Go.
DANGER
To reduce the risk of electric shock:
• Always unplug this device from the electrical outlet immediately after using and
before cleaning.
• Do not reach for a device that has fallen into water. Unplug immediately.
• Do not use while bathing or in a shower.
• Do not place or store device where it can fall or be pulled into a tub or sink. Do not
place in or drop into water or other liquid.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
• A device should never be left unattended when plugged in. Unplug from outlet when
not in use, and before putting on or taking off parts.
• Do not operate under blanket or pillow. Excessive heating can occur and cause fire,
electric shock, or injury to persons.
• Use this device only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
• Never operate this device if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or if it has gotten wet. Return the
device to a service center for examination and repair.
• Do not carry this device by supply cord or use cord as a handle.
• Keep the cord away from heated surfaces.
• Never operate the device with the air openings blocked. Keep the air openings free
of lint, hair, and any substance which may impair the flow of air.
• Never drop or insert any object into any device opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) devices are being used or where oxygen is
being administered.
• Never operate on a soft surface where the air openings may be blocked.
• Do not remove screws or attempt to disassemble.
• Unplug the device after charging or prior to use.
• Use device only according to these Operating Instructions, also available on
hyperice.com.
• Do not operate continuously for more than one hour. After one hour use, allow unit
to rest for 30 minutes before re-using.
• Unplug the unit after charging or prior to use.
