• Do not use directly on a hard surface. Use only on a carpeted floor or a fitness mat.
• Persons weighing above 250 lbs/113 kgs may damage or break the unit during
normal intended use.
• This is not a toy. For adult use only. Do not use if injured. Consult your doctor before
using this product.
• For storage or travel, toggle power switch to OFF position.
• Please do not use the Vyper Go, or any high-intensity vibration exercise device
without first consulting with your doctor if any of the following apply: Pregnancy,
diabetes with complications such as neuropathy or retinal damage, wear of pace-
makers, recent surgery, epilepsy or migraines, herniated disks, spondylolisthesis,
spondylolysis, or spondylosis, recent joint replacements, metal pins or plates or
any concerns about your physical health. Frail individuals and children should be
accompanied by an adult when using any vibration device. These contraindications
do not mean that you are not able to use a vibration or exercise device but we do
advise you to consult a doctor first. Ongoing research is being done to the effects
of vibration exercise for specific medical disorders. This will likely result in the
shortening of the list of contraindications as shown above. Practical experience
has shown that integration of a vibrating fitness device into a treatment plan
is beneficial in a number of cases. This must be done on the advice of and in
accompaniment with a doctor, specialist or physiotherapist.
The Vyper Go should only be charged with the double insulated, 18VDC Hyperice charger
(model number MX24Z2-1801000) that was supplied with the device. Do not charge the
Vyper Go overnight or leave the Vyper Go unattended when charging or in use.
The Vyper Go contains a battery which must be complied with safely at an
appropriate e-waste disposal or recycling facility.
CAUTION
The battery used in this device may present a risk of fire or chemical burn if
mistreated. Do not disassemble, heat above 100 C or incinerate. Dispose of used
battery promptly. Keep away from children. Do not disassemble and do not dispose
of in fire.
SAVE THESE INSTRUCTIONS
The Vyper Go is a cutting-edge fitness device that uses pressure and high-intensity
vibration to amplify the traditional foam rolling experience. It accelerates warmup and
recovery, releases tension and tightness in the muscles, and helps to maintain full
range of motion while promoting overall wellbeing and performance.
OPERATING
To turn on, press down on the power button for three seconds until LED lights
illuminate. Press again once for speed level one, twice for speed level two and speed
three times for level three. The blue LED lights will indicate the corresponding speed
level. Do not use directly on a hard surface. Use only on a carpeted floor or a fitness
mat. To turn off, press down on the power button for three seconds. The device is
fully turned off when all the LED lights are off. The device will turn off after 10 minutes
of use. To continue use, turn device on again and set to desired level.
CHARGING
Fully charge for two hours before first use. To charge, connect the adapter to the
charging port and plug into wall outlet. LED lights will illuminate to show battery level
and indicate active charging. LED lights will remain illuminated when fully charged
while adapter is plugged in. Device may be recharged at any time and at any battery
level. It is not recommended to fully deplete the battery to the red LED level. Fully
