HYOSUNG ST7, Owner'S Manual

Page: 59 / 90

WARNING
CAUTION
58
●
Do not remove absolutely airtight
cover as airtight type battery.
●
Keep after separate at the motorcycle
for the minimum of self electric dis-
charge and electric leakage when
don’t use for a long time.
● Remove the negative terminal
when keep intact at the motorcycle.
Never invert the battery cables.
Ensure that the ignition switch is in posi-
tion “OFF” before connecting or discon-
necting the battery, otherwise some
components might damage.
⊙
INSPECTION OF BATTERY
SOLUTION LEVEL
The battery is located under the front seat.
MF (Maintenance Free) battery of airtight
type is used for this motorcycle.
It is not necessary to inspect or supple-
ment battery fluid.
However, have your dealer check the
charging condition of battery periodically.
BATTERY
⊙ ⊙
CHECK AND CLEAN OF
BATTERY TERMINAL
Clean the battery terminal when it is dusty
or rusted.
1. Set the ignition switch “OFF” position.
2. Remove the front seat.
3. Check that battery lead wire and termi-
nal.
4. If necessary : disconnect the negative
battery wire first, then disconnect the
positive battery wire.
Remove the battery.
5. Clean the terminal.
If there is white dust, clean it with warm
water.
6. Connect the battery wires and grease
the terminal lightly.
When reinstalling the battery, be sure to
connect the positive
battery wire first,
then connect the negative battery
wire.