HYOSUNG ST7, Owner'S Manual

Page: 28 / 90

WARNING
CAUTION
CAUTION
CAUTION
CAUTION
② ②
“PASS ” SWITCH
Press the “PASS” switch to operate the
head lamp high beam for using when pass.
With the ignition switch in the “ON” posi-
tion, push the “PASS” switch to operate the
head lamp high beam.
27
① ①
CLUTCH LEVER
The clutch lever is used for disengaging
the drive to the rear wheel when starting
the engine or shifting the transmission gear.
Squeezing the lever disengages the
clutch.
LEFT HANDLE SWITCHES
Do not operate when the dimmer switch
“ ” position.
Use the clutch properly.
Otherwise, the clutch may be worn
quickly.
⑤ ⑤
HORN SWITCH
Press the switch to operate the horn.
④ ④
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
⊙ “ ” Position : Flash the left turn sig-
nal lamp.
⊙
“ ” Position : Flash the left turn sig-
nal lamp.
⊙ “
△
” (OFF) : Pushing the “
△
” position
will stop the turn signal
lamp to operate.
③ ③
DIMMER SWITCH
Change the direction of head lamp light.
⊙
“ ” : The head lamp high beam
come on.
The high beam indicator lamp
also comes on.
⊙ “ ” : The head lamp low beam
come on.
Set the dimmer switch “ ” when other
vehicle is running in front or against.
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the “OFF” position after com-
pleting the turn or lane change.
Use the horn switch only in case of
need.
❹
❺
❶
❷
❸