HYOSUNG ST7, Owner'S Manual

Page: 41 / 90

WARNING
WARNING
CAUTION
CAUTION
40
5. Remove the three nuts ③ holding the
engine oil filter cap
⑥
in place.
● ●
ENGINE OIL FILTER INSTALLATION
HYOSUNG
16510HN910
OUTSIDE
LUSTER
MATERIAL
INSERTED
DIRECTION
Insert the filter so that surface of the fil-
ter hole turn toward the engine.
6. Replace the engine oil filter
⑦
with a new
one.
When install the engine oil filter, neces-
sarily, “HYOSUNG” character and
“16510HN910” part’s NO. be installed
toward the outside, otherwise can dam-
age the engine.
7. Before replacing the engine oil filter cap
⑥
,
be sure to check that the engine oil filter
spring
④ and the “O” ring ⑤ are installed
correctly. Use new “O” ring each time the
engine oil filter is replaced.
8. Replace the oil filter cap ⑥ and tighten the
nuts securely but do not over tighten them.
Engine oil and exhaust pipes can be hot
enough to burn you.
Wait until the oil drain plug and exhaust
pipes are cool enough to touch with
bare hands before draining oil.
New and used oil can be hazardous.
Children and pets may be harmed by
swallowing new or used engine oil or
solvent. Continuous contact with used
engine oil has been found to cause skin
cancer in laboratory animals. Brief con-
tact with used oil or solvent may irritate
skin.
●
Keep new and used oil and solvent
away from children and pets.
● Wear a long-sleeve shirt and water-
proof gloves.
● Wash with soap if oil or solvent con-
tact your skin.
❸
❸
❸
❻
❹
❸
❼
❺
❻
❸