MAINTENANCE PROCEDURE 2-8
Middle line
①
Oil drain plug
NOTE:
Inspect Initial 1,000 km and Every 8,000 km.
Inspect transmission oil periodically following procedure
below.
●
Remove the low leg shield.
●
Remove the clutch cover.(Refer to page 3-6)
●
Remove the oil level bolt
①
and inspect oil level.
If the level is below the level hole, add oil until oil
flows from the level hole.
●
Tighten the oil level bolt to the specified torque.
TRANSMISSION OIL
BRAKES
Oil level bolt : 9~15 N
∙
m (0.9~1.5 kg
∙
m)
FRONT BRAKE FLUID LEVEL
●
Keep the motorcycle upright and place the handlebar
straight.
●
Check brake fluid level by observing the middle line
on the brake fluid reservoir.
●
When the level is bolow the middle line, replenish
with brake fluid that meets the following specification.
DOT4
Specification and classification
The brake system of this motorcycle is filled with
a glycolbased brake fluid. Do not use or mix dif-
ferent type of fluid such as silicone-based and
petroleum-based. Do not use any brake fluid
taken from old, used or unsealed containners.
Never re-use the brake fluid left over from the last
servicing and stored for long periods.
WARNING
Brake fluid, if it leaks, will interfere with safe run-
ning and immediately discolor painted surfaces.
Check the brake hoses for cracks and hose joints
for leakage before riding.
WARNING
HYOSUNG Brake fluid : 99000-23021
NOTE:
Inspect Initial 1,000 km and Every 4,000 km.
Replace the hose Every four years.
Replace the brake fluid Every two years.
