HYOSUNG GT125 - PARTS CATALOGUE, Owner'S Manual

Page: 73 / 106

72
①
The clutch lever play
②
The clutch lever adjuster lock nut
③
The clutch lever adjuster
④
The rubber boot
⑤
The clutch cable adjuster
⑥
The clutch cable adjuster lock nut
If you find the play of the clutch lever
incorrect, adjust it in the following way :
At each maintenance interval, adjust the
clutch cable play by means of clutch cable
adjuster.
The cable play should be 4 mm (0.16 in)
as measured at the clutch lever holder
before the clutch begins to disengage.
CLUTCH CABLE
❹
❶
❷
❸
❺
❻
●
Withdraw the protection.
●
Loosen the lock nut
①
.
●
Rotate the adjuster
②
until achieving the
specified free play.
●
When finished, tighten the lock nut
①
and check free play again.
●
Refit the protection.
There should be 0.5 ~ 1.0 mm (0.02 ~
0.04 in) free play in the throttle cable.
If this is not the case, proceed as follows :
THROTTLE CABLE PLAY
ADJUSTMENT
Inadequate throttle cable play can cause
engine speed to rise suddenly when you
turn the throttle grip. This can lead to
loss of rider control.
Adjust the throttle cable play so that
engine idle speed does not rise due to
throttle grip movement.
WARNING
When finished, turn the handlebars to
make sure its movement does not affect
the engine idle rpm and check that the
throttle grip - when opened and then
released - returns smoothly to the closed
position.
WARNING
❷
❶
(0.02 ~ 0.04 in)