HYOSUNG GT125 - PARTS CATALOGUE, Owner'S Manual

Page: 46 / 106

45
⊙ ⊙
ENGINE OIL LEVEL CHECK
Follow the procedure below to inspect the
engine oil level.
1. Start the engine and run it for a few
minutes.
2. Stop the engine and wait three
minutes.
4. Inspect the engine oil level through the
engine oil level lens on the right side on
the engine.
Long engine life depends much on the
selection of quality oil and the periodic
changing of the oil.
Daily oil level checks and periodic
changes are two of the most important
maintenances to be performed.
ENGINE OIL
“Fuel and Engine oil” use certainly to
recommend at the front part.
CAUTION
N O T E
Engine oil expands and oil level
increases when the engine oil is hot.
Check and adjust engine oil level when
the engine oil is not hot.
3. Hold the motorcycle vertically.
The engine and the components of the
exhaust system become very hot and
remain hot for some time after the
engine has been stopped. Before
handling these components, wear
insulating gloves or wait until the engine
and the exhaust system have cooled
down.
WARNING
N O T E
Position the motorcycle on firm and flat
ground.