HYOSUNG GT125 - PARTS CATALOGUE, Owner'S Manual

Page: 37 / 106

36 36
LIGHT SWITCH
~ ~
Only for
『 『 』 』₩ ₩
⊙
“ ” position
: The head lamp comes on.
⊙ “ ” position
: The meter lamp, tail lamp and license
plate lamp come on.
But, the head lamp not come on.
⊙ “ ” position
: All lamps go off.
③ ③
THROTTLE GRIP
Engine speed is controlled by position of
the throttle grip. Turn it toward you to
increase engine speed. Turn it away from
you to decrease the engine speed.
Apply the brake lightly and with great
care on slippery surfaces to avoid
skidding.
WARNING
Avoid turning the throttle grip during
brakes.
WARNING
② ②
FRONT BRAKE LEVER
The front brake is applied by squeezing
the brake lever gently toward the throttle
grip.
Front brake be anxious about motorcycle
falling down when braking suddenly as disk
brake system. The brake lamp will come on
when the lever is squeezed.
4 4- -2 2
HAZARD WARNING SWITCH
~ ~
For
『 『 』 』
&
『 『 』 』₩ ₩
⊙
“ ” : All four turn signal lamps and
indicator lamp will flash
simultaneously when the
switch is turned on with the
ignition switch in “ON” position.
⊙
“ ” : The turn signal lamps and
indicator lamp go off.
Use the hazard warning switch to warn
other traffic during emergency parking or
when your motorcycle could otherwise
become a traffic hazard.
4 4- -11
Put out the hazard warning switch
directly after used.
If the motorcycle ride with the hazard
warning switch turned on condition,
other driver confuse and the battery’s
service life is shortened as electrical
consumption.
CAUTION
The
『 『 』 』
&
『 『 』 』
always come on the head lamp, meter
lamp, tail lamp and license plate lamp
when the ignition switch was turned to
the “ON” position.
CAUTION
The
『 『 』 』
’s lamps are come on by
operating the light switch turning the
ignition switch to the “ON” position.
N O T E