HYOSUNG Comet 650, Manual

Page: 48 / 90

47
● ●
OIL FILTER INSTALLATION
HYOSUNG
16510HN910
OUTSIDE
LUSTER
MATERIAL
INSERTION
DIRECTION
Insert the filter so that surface of the fil-
ter hole turn toward the engine.
CAUTION
When install the oil filter, necessarily,
“ “
HYOSUNG
” ”
character and
“ “
16510HN910
” ”
part
’ ’
s NO. install toward
the outside, otherwise can damage the
engine.
CAUTION
6. Replace the engine oil filter
⑦
with a new
one.
7. Before replacing the engine oil filter cap ⑥ ,
be sure to check that the engine oil filter
spring
④
and the
“
O
”
ring
⑤
are installed
correctly. Use new
“
O
”
ring each time the
engine oil filter element is replaced.
8. Replace the oil filter cap
⑥
and tighten the
nuts securely but do not over tighten them.
Engine oil and exhaust pipes can be hot
enough to burn you.
Wait until the oil drain plug and exhaust
pipes are cool enough to touch with
bare hands before draining oil.
WARNING
New and used oil and solvent can be
hazardous. Children and pets may be
harmed by swallowing new or used
engine oil or solvent. Continuous con-
tact with used engine oil has been found
to cause skin cancer in laboratory ani-
mals. Brief contact with used oil or sol-
vent may irritate skin.
● ● Keep new and used oil and solvent
away from children and pets.
● ●
Wear a long-sleeve shirt and water-
proof gloves.
● ●
Wash with soap if oil or solvent con-
tact your skin.
WARNING
④
③
⑦
③
⑤
⑥
COPYRIGHTED