HYOSUNG Comet 650, Manual

Page: 36 / 90

35
① ①
CLUTCH LEVER
The clutch lever is used for disengaging
the drive to the rear wheel when starting
the engine or shifting the transmission gear.
Squeezing the lever disengages the
clutch.
② ② “ “
PASS
” ”
SWITCH
Press the
“
PASS
”
switch to operate the
head lamp high beam for using when pass.
With the ignition switch in the
“
ON
”
posi-
tion, push the
“
PASS
”
switch to operate
the head lamp high beam.
⑤ ⑤
HORN SWITCH
Press the switch to operate the horn.
④ ④
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
◉“ � ”
Position : Flash the left turn sig-
nal lamp.
◉“ � ” Position : Flash the right turn
signal lamp.
③ ③
DIMMER SWITCH
Change the direction of head lamp light.
◉“ ” : The head lamp high beam
come on.
The high beam indicator lamp
also comes on.
◉“ ”
: The head lamp low beam
come on.
LEFT HANDLE SWITCH
Do not operate when the dimmer switch
“ “ ” ”
position.
CAUTION
Set the dimmer switch
“ “ ” ”
when other
vehicle is running in front or against.
WARNING
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the
“ “
OFF
” ”
position after com-
pleting the turn or lane change.
CAUTION
�
�
�
�
�
COPYRIGHTED