HYOSUNG Comet 650, Manual

Page: 32 / 90

③ ③
HIGH BEAM INDICATOR LAMP
The high beam indicator lamp will come
on when the head lamp high beam is
turned on.
④ ④
NEUTRAL INDICATOR LAMP
The neutral indicator lamp will come on
when the transmission is in neutral.
The lamp will go out when you shift into
any gear other than neutral.
⑤ ⑤
COOLANT TEMPERATURE METER
①
TACHOMETER
The tachometer indicates the engine
speed in revolutions per minutes(rpm).
② ②
TURN SIGNAL INDICATOR LAMP
When the turn signals are being operated
either to the right or to the left, the indicator
will flash at the same time.
INSTRUMENT PANEL
( & )
Running the engine with high engine
coolant temperature can cause serious
engine damage.
If the engine coolant temperature meter
comes on the red lamp of
“
H
”
mark,
stop the engine to let it cool.
CAUTION
When the ignition switch is turned to the
“ON” position, the display of speedome-
ter will come on.
CAUTION
To adjust the light of speedometer dis-
play, push the switch
⑨ ⑨
(in the normal
mode) for 0.6 ~ 1 seconds while you
want to change.
[Light of speedometer display]
100%
↓ ↓
75%
↓ ↓
50%
↓ ↓
25%
CAUTION
31
『 』
&
『 』
’s the
speedometer is VFD(Vacuum Fluorescent
Display) type, it indicates the coolant tem-
perature.
The “H”(Hot) mark indicates the coolant
temperature is hot.
When the coolant temperature is higher
than 125 ℃ , the red lamp of “H”(Hot) mark
comes on.
The “C”(Cool) mark indicates the coolant
temperature is cool.
COPYRIGHTED