HYOSUNG Aquila Classic, Owner'S Manual

Page: 76 / 94

N O T E
CAUTION
WARNING
75
3. Loosen the drive belt adjuster lock nut
and adjuster
②
, left and right, and disen-
gage the drive belt from the rear pulley.
4. Loosen the rear axle
③
.
5. Draw out the rear axle ③ .
6. Pull the rear wheel assembly rearward.
7. To reinstall the rear wheel assembly,
reverse the complete sequence listed.
BULBS
Keep fuel and other flammable sub-
stances away from electric components.
Before changing a bulb, set the ignition
switch to position “OFF” and allow a few
minutes for the bulb to cool down.
Wear clean gloves or use a clean, dry
cloth to handle the new bulb.
Do not put your fingerprints on the bulb,
as this may lead to overheating and fail-
ure.
If you have handled the bulb with bare
hands, clean it with alcohol to avoid any
damage.
DO NOT PULL ON THE WIRES.
Before changing a bulb, check the fuses.