HYOSUNG Aquila Classic, Owner'S Manual

Page: 29 / 94

CAUTION
WARNING
WARNING
WARNING
28
Turn off the hazard warning switch
promptly after use.
If the motorcycle is ridden with the haz-
ard warning switch turned on, it may
confuse other drivers.
The battery will eventually become
depleted if the hazards warning remains
on for a period of time without the
engine running.
④ ④
HAZARD WARNING SWITCH
⊙
“ ” : All four turn signal lamp and
indicator lamp will flash simul-
taneously when the switch is
turned on with the ignition
switch in “ON” position.
⊙ “ ” : The turn signal lamp and indi-
cator lamp go off.
Use the hazard warning lamps to warn
other traffic during emergency parking or
when your vehicle could otherwise become
a traffic hazard.
③ ③
THROTTLE GRIP
Engine speed is controlled by position of
the throttle grip. Turn it toward you to
increase engine speed. Turn it away from
you to decrease the engine speed.
Apply the brake lightly and with great
care on slippery surfaces to avoid skid-
ding.
Avoid turning the throttle grip during
braking.
② ②
FRONT BRAKE LEVER
The front brake is applied by squeezing
the brake lever gently toward the throttle-
grip.
The front brake is a powerful disc brake
system. Do not brake excessively so as to
cause the front wheel to lock up or skid.
The brake lamp will come on when the
lever is squeezed.
Do not operate the engine stop switch
into the “ ” position while driving at
one’s pleasure.
① ①
ENGINE STOP SWITCH
⊙
“ ” Position : Use in emergency or
when motorcycle has fallen over
to stop engine quickly.
The ignition circuit is off. The
engine cannot start or run.
⊙
“ ” Position : The ignition circuit is on
and the engine can start and run.
Keep in this position for normal
engine operation.
RIGHT HANDLE SWITCHES
❶
❷
❸
❹
❺