DISASSEMBLY
Remove the front wheel. (Refer to page 6-2)
Remove the brake caliper. (Refer to page 6-7)
Remove the front fork after loosening the front fork
upper
and lower
clamp bolts .
Remove the front fork upper bolt
, O-ring
, front
fork inner spacer
and spring guide
.
Invert the front fork and stroke it sev e r a l times to
drain out the fork oil.
Hold the front fork in the inverted position for a few
minutes to allow the fork oil to fully drain.
CAUTION
Secure the brake caliper to the frame with a string
etc., taking care not to bend the brake hose.
NOTE
Slightly loosen the front fork upper bolt
to
facilitate later disassembly.
Remove the front fender. (Refer to page 6-1)
6-21 CHASSIS
Summary of Contents for 2002 Comet 125
