HYOSUNG 2002 Comet 125, Service Manual, Page: 135 / 199

MASTER CYLINDER INSPECTION
Inspect the master cylinder bore for any scratches or
other damage.
Inspect the piston surface for any scratches or other
damage.
Specification and Classification
: DOT 3 or DOT 4
Wh e n r e m o u n t i n g t h e m a s t e r c y l i n d e r t o t h e
h a n d l e b a r s , f i r s t t i g h t e n t h e c l a m p b o l t s f o r
upside as shown.
MASTER CYLINDER REASSEMBLY
Reassemble the master cylinder in the reverse order of
disassembly.
Pay attention to the following points :
CAUTION
Wash the master cylider components with new
brake fluid before reassembly.
When washing the components, use the speci-
fied brake fluid. Never use different types of
fluid or cleaning solvents such as gasoline,
kerosine, etc.
NOTE
When installing the circlip, make sure that the sharp
edge of the circlip faces outside.
Up
Master Cylinder
Handlebar
Clearance
WARNING
Bleed air from the brake fluid circuit after
reassembling master cylinder.(See page 2-16)
6-11 CHASSIS