HygroMatik SteamKit H, Manual

Page: 31 / 44

Page 31
» Separate cylinder halves.
» Remove the used O-rings between
the cylinder halves, in the base and
in the steam hose adapter.
» Clean the cylinder inside.
» Clean the heating element(s) by
scraping or scrubbing. A small
amount of scale hardener is harm-
less.
» Clean both strainer.
» Check the base and its connections
for limescale deposits and clean if
necessary.
» Insert new O-rings between the cyl-
inder halves, in the base and in the
steam hose adapter.
» Put the cylinder halves together and
reconnect them with the flange
clamps.
» When assembling the cylinder, make
sure that the brackets and reinforce-
ments are on top of each other.
Risk of functional disruption!
Use descaler or cleaning detergents only for
cylinder and heater element cleaning. Do not
introduce in cylinder base or apply to hoses!
Prior to restarting the unit, make sure that the
device assemblies in question are thoroughly
flushed or rinsed.
Possible damage to the unit!
Excessive use of force during mechanical
cleaning of the cylinder or heating element
can damage these parts of the unit.
NOTICE