Page 37
11. Control operation
11.1 Principal user guidance
On powering up the nozzle system, the soft-
ware version is shown in the display for a few
seconds. In normal operation, the display
then shows actual humidification output as a
standard display. When a key is pressed, the
first reading in a list of reading and input val-
ues is indexed. The complete list may be
visualized by scrolling using the arrow keys.
By means of inputting a 2 digit code, access
to „Advanced level“ is possible (for input code
see table in section „Advanced level sub-
menus and relating parameters“). The
advanced level parameters are functionally
grouped in submenus (1) to (7)
.
The code
input is reset to its standard („0“), should no
keystroke occur within 3 minutes.
11.2 Menu structure
Overview on menu structure
*)
numbers in paranthesis are group num-
bers
Basic level
From standard display (actual steam output)
basic level may be accessed by pressing any
key on the control panel. On basic level,
among other information reading values r01
to r45 are available. After a certain time span
with no keystroke control switches the dis-
play back to standard display. Factory setting
for this time out is „5 minutes“.
Besides showing the reading values, basic
level also features „P00“ for code input allo-
wing advanced level access (s. „Menu tree
section).
Advanced level
On advanced level, the control parameters of
functional groups (1) to (7) (s. „Overview on
menu structure“) may be individually
changed.
Menu tree
The detailed menu tree with all of the reading
values and settable values as well as all of
the parameters is depicted in the next sec-
tion.
Parameter descriptions
A tabular list of the advanced level parame-
ters and a more detailed description may be
found in the sections „Advanced level sub-
menus and their parameters“ and „Detailed
parameter descriptions“, respectively, further
down in this chapter.
Reading values
Code input
Parameter selection
Basic level
nach Code-Eingabe
display
Standard-
Parameter- Control (1)
*)
Flushing (2)
Service (3)
Governing (4)
Functions (5)
Settings (6)
Adiabate functions (7)
Advanced level
selection
