EN-GB - 20
HYENA E-BIKE SYSTEMS
Notes
• The battery is equipped with a Battery Management System (BMS). It is designed to
protect a fully discharged battery from damage.
However, in order to maintain the best possible battery performance and lifespan, Hyena
recommends regularly recharging your battery to at least 80% of the full capacity.
• The Li-ion batteries gradually lose capacity depending on age and use.
A significantly reduced operating range after charging can be a sign that the battery
is reaching the end of its useful life and has to be replaced.
► Charging procedure
• The battery can always be charged, regardless of the current charge level.
• The charging can be interrupted at any moment. Interrupting the charging process will
not damage the battery.
• Please perform charging in environments between 0°C (32°F) and 40°C (104°F).
⚠
CAUTION
Always turn off the assist system manually before charging.
1. Open the cover of the charging socket on the e-bike, or, when installed, the cover on the
(optional) range extender battery.
2. Connect the charging plug with the charging socket on the battery.
Charging socket on the frame
Charging socket on the (optional) range extender
(when
installed)
3. Plug the AC plug of the charger into a socket (100V to 240V). The LED on the charger
will illuminate red while charging.
4. While charging, the charge level indicator on the console will show the charge level of
the battery. Each illuminated green LED on the console represents approximately 20%
capacity. The battery is fully charged when the indicator on the charger turns green and
all green LEDs on the charge level indicator on the console illuminate.
Notes
• When the range extender is installed, the main battery will be charged to its full capacity
first, then the range extender will be charged. The charge indicator shows the combined
charge level.
•
The e-bike system will power off after reaching full charge (within about six minutes)
.
5. After charging, disconnect the AC plug from the socket and the charging plug from the
battery.
6. Close the charging socket cover to protect the charging socket.
