Importör HYDX – TyTera - WOUXUN
Svenska OH Gruppen – Anders Olsson –
– Tel. 070-598 80 50
HYDX D50 VHF DMR – WWW.TROLLEBORG.SE
32
4. Press [
◁
or
▷
] key to LED indicator, and press [OK] key to select.
5. The screen displays open, press [OK] button to enable LDE light, screen shows to turn on the LED light.
Or The screen displays off, press [OK] button to turn off the LED light, screen shows to turn off the LED light.
If you disable the LED light, buttons and keyboard backlight automatically turns off.
Turn On or Off VOX Function
This function allows you to initiate voice-activated hands-free calls on pre-programmed channels. Whenever a
microphone with VOX function detect voice, radio will automatically transmit signals within pre-programmed period of
time.
During radio operation press [PTT] key will disable VOX function, to re-enable the VOX function, do one of the
following:
• Turn off and return on radio
• through the channel knob to change the channel, or
• Perform the following procedure:
Note: Enabling or disabling this function is limited to activate radios of these function.
Press pre-programmed VOX on / off key, to turn on or off this function.
Using the menu function:
1. Press [OK] key to enter the menu mode.
2. Press [
◁
or
▷
] key to Settings, and then press [OK] key to select.
3. Press [
◁
or
▷
] key to radio settings, and then press the [OK] key to select.
4. Press [
◁
or
▷
] key to VOX, and then press [OK] key to select.
5. Screen shows VOX off and VOX level 1-10S, if you choose to turn off, press [OK] key to disable the VOX function,
emitting a beep and the screen displays VOX off. If you choose 1-10S, VOX function is enabled, and the voice transmit
sensitivity is on the corresponding level. If you activate the call allowing sound, you can initiate a call using a trigger
word. Waiting sound end (if activated), and then speak clearly into the microphone.
Power-on Password
1. Press [OK] key to enter the menu mode.
2. Press [
◁
or
▷
] key to Settings, and then press [OK] key to select.
3. Press [
◁
or
▷
] key to radio settings, and then press [OK] key to select.
4. Press [
◁
or
▷
] key to power-on password, and then press [OK] key.
5. Use the keypad to enter the correct 8 digits password (You can pre-set by software), and then press the [OK] key.
6. If the password is incorrect, the screen displays an error code. If the password is correct, the screen displays
options.
7. If the first line shows open, press [OK] key to display the power-on password application. Next time you need to
enter the correct password to turn on radio. If the first line shows off, press [OK] key to display the power-on password
cancellation, next time you can directly turn on radio.
8. Press [
◁
or
▷
] key to change power-on password, and then press [OK] key to select.
9. Enter 8 digits new password, and then press [OK] key to select.
10. Once again, enter 8 digits new password, and then press [OK] key to select.
11. Screen displays that password was successfully changed.
Note: The power-on password must be set to eight digits.
Clock
Clock settings are divided into:
