background image

   

Importör HYDX – TyTera - WOUXUN 

Svenska OH Gruppen – Anders Olsson – 

[email protected]

 – Tel. 070-598 80 50 

HYDX D50 VHF DMR – WWW.TROLLEBORG.SE 

15 

 

4. During transfer , LED indicator becomes red and emergency alarm mark will show on screen . 

5. After the time of emergency microphone 

radio stop to transmit .Press [PTT] key to transmit again   

If the radio under the “Silence”mode

there are not any sounds or notices during the emergency mode 

not receive 

calls from target walkie talkie 

until pass the pre-programmed emergency microphone limited time and    press 

with [PTT] key .If the radio under“with voice mute”mode ,there are not any sounds or notices during the emergency 

mode ,not receive calls from target walkie talkie .Until press the [PTT]key to call or receive 

then the screen will 

show up . 

Notice

  If the emergency call failed , then the walkie talkie will back to home screen . 

 

6) Restart Emergency Mode 

Two situations will be happen

 

• It will logout the emergency mode , if the walkie talkie change the channel under the emergency 

mode  .While  ,  reset  the  emergency  mode  under  the  new  channel  ,  the  walkie  talkie  restart  the 

emergency call . 

• If press the Pre-programmed emergency key during the emergency call , the walkie talkie will be 

stop the emergency call but restart later . 

 

7) Logout Emergency Mode 

The walkie talkie will logout emergency mode when any of the following situations happen 

 

• Confirm with the received emergency call

or 

• Meet with the max emergency call

or 

• press the pre-programmed emergency off key

or 

• Press[PTT]key. 

 

Notice

  Emergency mode will be logout when power off the walkie talkie 

Radio will not under emergency mode when 

the radio is power on next time . 

 

Menu Operation 

 

Inputting Character 

Users can use the 3 x4    alphanumeric keypad to access the radio’s function. When you‘re Using the keypad 

to  input  a  user  alias  or  text  messages,  walkie-talkie  input  contains  three  modes:1,  English  letters 

mode,2,chinese  input  mode,  3,digital input  mode. When using  the  keypad  input  ID,  you  can  only  select  the 

digital mode. 

English Letter Mode

 

Users have to press a button several times for getting some characters. The following table shows how many 

times needed to press a button to get the required character.   

Key 

1        2        3        4        5        6        7        8        9        10        11        12        13     

 

1        .       

,        ?      !        @        &      ‘        %        -          :          *        # 

a        b        c        2          A        B        C       

d        e        f        3        D        E        F 

Summary of Contents for HYDX-D50





































Reviews: