Importör HYDX – TyTera - WOUXUN
Svenska OH Gruppen – Anders Olsson –
– Tel. 070-598 80 50
HYDX D50 VHF DMR – WWW.TROLLEBORG.SE
30
2. Press [
◁
or
▷
] key to settings, and then press [OK] key to select.
3. Press [
◁
or
▷
] key to radio settings, and then press the [OK] key to select.
4. Press [
◁
or
▷
] key to tone / prompts, and then press [OK] key to select.
5. Press [
◁
or
▷
] key to keyboard tone, then press [OK] key to select.
6. Press [OK] key to select Open, then enable the keyboard tone, the screen shows keyboard tone is turned on.
Press [OK] key to select off, then turn off the keyboard sound, the screen shows keyboard tone is turned off.
Set the Power Level
You can set each channel power level to high or low.
Setting: High-power radio implement communications with relatively far distance radios. Low-power radio
implement communications with relatively close distance radios.
Press pre-programmed high / low power selection key, you can switch high / low transmit power.
Using the menu function:
1. Press the [OK] key to enter the menu mode.
2. Press [
◁
or
▷
] key to Settings, and then press [OK] key to select.
3. Press [
◁
or
▷
] key to radio settings, and then press the [OK] key to select.
4. Press [
◁
or
▷
] key to power, and then press [OK] key to select.
5. Follow the on-screen instructions to change the current settings.
6. Press [OK] key to select the new power level.
7. Return to the previous menu screen.
Press [back] to return to the main screen, the screen displays the power level icon.
Control Screen Backlight
You can turn on or off the screen backlight according to the need. This setting also affects the menu button and the
keyboard backlight.
Press a pre-programmed automatical backlight key to switch backlight settings
Using the menu function:
1. Press [OK] key to enter the menu mode.
2. Press [
◁
or
▷
] key to Setting, and then press [OK] key to select.
3. Press [
◁
or
▷
] key to radio settings, and then press the [OK] key to select.
4. Press [
◁
or
▷
] key to backlight, and then press [OK] key to select.
5. The screen displays always open, 5S, 10S, 15S options, press [OK] key to select always open, the screen will
remain lit and won’t turn off, or if you choose 5S, 10S, 15S, the screen backlight will be off in the corresponding time
under users without any operations.
Setting Squelch level
You can adjust radio squelch level, thus filtering low signal intensity useless call or channel higher than normal value.
Setting: Normal is the default, strict filtering (useless) call or background noise. However, a call from a remote location
may also be filtered out.
Press pre-programmed strict / normal squelch button to switch between normal and strict squelch level.
Using the menu function:
1. Press [OK] key to enter the menu mode.
2. Press [
◁
or
▷
] key to Settings, and then press [OK] key to select.
