Importör HYDX – TyTera - WOUXUN
Svenska OH Gruppen – Anders Olsson –
– Tel. 070-598 80 50
HYDX D50 VHF DMR – WWW.TROLLEBORG.SE
17
Sending a two way radio detection
Using menu function:
1,Press OK to enter menu mode
2,Press[
◁
or
▷
] to select contacts ,then press[OK] to select
3,Press[
◁
or
▷
] to to the required user alias or ID, and then press [OK] button to choose.
Sending the radio’s detection
Using Menu
：
1.Press [OK] to enter Menu mode
2. Press[
◁
or
▷
]button to select Contacts, then press[OK] to select.
3. Press[
◁
or
▷
]to The required user alias or ID, then press [OK] to select
Or press[
◁
or
▷
]key to manual dialing, and then press [OK] key to select. If there are before calling ID, show ID and along
with the flashing cursor, using the keyboard editing ID, press [OK].
4. Press [
◁
or
▷
]to radio detection, and then press [OK] to select
5. When Screen displays radio detection: < user alias or ID >, it is indicating the ongoing of radio detection. The LED
indicator light is red.
6.Waiting for confirmation
7If the target radio is active in the system , then it makes a prompt sound, screen will show that target two way radio
has responded shortly.
Or if the target radio in the system is not active, then it makes a prompt sound, screen will show that target two way
radio has no answer shortly.
8.Two way radio returns to user alias or ID screen. If you press [back] when waiting for confirmation, made a prompt
sound, two way radio will end all retry and exit the two way radio detection mode.
Monitoring
Using monitoring function to open the target two way radio’s microphone (only the user alias or ID). You can use the
function to monitor any sound around target two way radio.
Your must allow your two way radio to use this function by programming it.
Starting monitor
Using the Menu:
1. Press [OK] to enter the Menu
2. Press[
◁
or
▷
]to Contacts,then press[OK]to select
3. Press[
◁
or
▷
] to The required user alias or ID, then press [OK] to select
Or press [
◁
or
▷
] key to manual dialing, and then press [OK] key to select
If there are any calling ID remains before, radio shows the ID and along with the flashing cursor, using the keyboard to
edit the ID, press [OK] key to choose.
Or press[
◁
or
▷
]key to manual dialing, and then press [OK] key to select. Inputting the user alias or ID, and then press
[OK] key to select.
4. Press[
◁
or
▷
] to select Monitor, then press [OK]to select
5. When two way radio makes a prompt sound, LED light turns green.
6. Waiting for confirmation.
7. Screen displays Monitor successed,
Or screen displays Monitor failed
If success: two way radio began to receive voice signals from the radios which are being monitored voice and screen
