- 2 -
General
Our control box type HY-
MAG
Competition is a high-quality menu and micro-processor controlled
control box providing maximum efficiency for the HY-
MAG
Water Conditioning Units sizes DN20
to DN65. The control box is set ex works to the individual water conditioning units.
The instruction render a survey on the menu guide and the individual programming possibilities
for the operator.
The control box shall only be started if the Harting plug connection between control box itself and
water conditioning unit is closed! Insert Harting connection of the control box into the correspond-
ing bushing at the water conditioning unit and close safety bracket.
NOTE :
The HY-
MAG
Competition control box is provided with a transparent
plastic glass. To be able to change or set control operations, the plastic
cover must be opened with the right-hand closure.
Once setting has been finished, the glass must be closed again with an
audible noise.
Initiating phase
Once the control box was connected to the mains power and switched on, the initiating phase
and an initial system check is started automatically. Every individual and actually running operat-
ing sequence is shown in the LCD
– display.
Standard display :
Control box test :
Short-circuit test :
Operation - test:
Technical operation check of complete HY-
MAG
system (control box and
water conditioning unit). The below individual sequences are shown
Test current to water conditioning unit See
list of individual current rates for units
(nom. width)
Pre-set water conditioning unit
–
example HY-
MAG
DN20/25
Check remanence clearance
H Y D R O T E C
Competition V. 1.00
Short-circuit - test
Test OK
Control box - test . . . .
Control box OK
Actor
– test
current: xxx mA
Actor
– test
Hydromag type: DN 20/25
Actor
– test
Time reman. clearance: OK
