Hydrospace S4 Standup, Owner'S Manual, Page: 77 / 115

77
NOTE
When you open the oil cap, remove the dipstick and clean it. Put the dip-
stick back inside but do not screw the cap closed. Remove the dipstick
again and check the oil measurement.
Start the engine, run in the idle position for 10 sec. Then stop the
engine.
With the engine stopped, open the oil cap and check the dipstick mea-
surement. (A, ill. 2).
The oil measurement is okay, until the oil level goes to the MIN marking
on the dipstick (ill. 3).
Abb. 2
Abb. 3
A
NOTE
The oil level will rise when the engine warms up and achieves operating
temperature.