HydroQuip PLATINUM PS-9003, Installation & Operation Manual

Page: 21 / 24

19
SYSTEM DATA LABEL
The system data label is located on the control box. This label is very important and
contains information you will need to establish your electrical service. The voltage and
amperage ratings are shown on the bottom of the label. Product, Model, Serial and Code
numbers are also shown on the label.
Note: This information will be necessary if you should ever have to request warranty or any
other type of service.
Refer to NEC for Breaker Sizing
PS-900x
120 240
16 40/48
HQ-6000
1 PHASE - 60Hz
HOR03-xxxx-
WARRANTY INFORMATION
To all original purchasers, HydroQuip, warrants this product to be free from defects in
material and workmanship for a period of 3 years from the date of purchase.
Hydro-Quip will, at it’s discretion, repair or replace any part which has been found to be
defective.
This warranty excludes damage as a result of: normal wear, freezing, low voltage, chemical
abuse, accident, negligence, alteration, improper installation, use or care.
To obtain warranty service, return defective products within the warranty period to Hydro-
Quip.
The Hydro-Quip Limited Warranty is for service on the control box only. Purchaser is
responsible for removal or reinstallation labor, freight charges, or any other such costs
incurred in obtaining warranty service.
Hydro-Quip assumes no responsibility for incidental or consequential damages. Some
states do not allow the exclusion of incidental or consequential damages, so the above
limitations and exclusions may not apply to you. This warranty gives you specific legal
rights and you may also have other rights, which vary from state to state.
If you are the end user for this control system, the spa dealer may provide a different
warranty; contact your spa dealer for details and warranty information.