25
Circuit board configuration is Incorrect -
Contact your local dealer.
Pump Not Plugged-In -
Plug in the Pump.
Air Lock in Plumbing System - “Bleed” the system.
Restricted Flow -
Insure that the water shut-off valves are open and that suction
fittings are not blocked by debris.
Dirty Filter -
Clean or replace filter.
Low Water Level -
Increase water level to recommended level.
Main Breaker is OFF -
Set to On.
Sub-Panel Breaker Off -
Set to On.
Equipment GFCI Off -
Set to On.
Power switch in Off position -
Set to On
.
Components not plugged in -
Plug in components.
Power cord not plugged in -
Plug in power cord.
Over or High Temperature Protection On -
Refer to Spa Side Messages.
Nothing Operates
No, Low or Surging Water Flow
Low Speed Pump Not Operational
Blower or Pump Not Plugged-In -
Plug in the Blower or Pump.
Over or High Temperature Protection On -
Refer to Spa Side Messages.
Jets or Blower Not Operational
The following describes situations and possible solutions to common problems you may
encounter as a spa owner.
TroubleShooting
Blown Fuse -
Contact your local dealer.
Blown Fuse -
Contact your local dealer.
Troubleshooting