Rain Pause
The Rain Pause feature allows you to suspend irrigation for All
Stations for up to 14 days. After a Rain Pause setting has expired,
normal irrigation will resume. Rain Pause can be set automatically
but can be4 changed from the controller.
To set a Rain Pause:
1.
Turn the Function Selector dial to “Rain Pause.”
2.
Using the Lower Line dial, set the number of days to pause.
Quick Reference Guide
87
Adjust (Auto Mode Only)
The Adjust feature allows you to easily adjust (increase or decrease)
the watering times per station in 5% increments. Adjust should be
used for fine tuning each station according to its specific watering
needs.
How to adjust:
1.
Turn the Function Selector dial to “Adjust.”
2.
Using the Upper Line dial select the station to adjust.
3.
Using the Lower Line dial, select the amount to adjust the
station.
Manual
The Manual feature allows you to immediately start irrigation for a
specified number of minutes for all stations or a single station(s).
Only one station can be on at a time when watering in Manual.
To water all stations:
1.
Turn the Function Selector dial to “Manual.”
2.
Using the Lower Line dial select Manual Water All.
3.
Rotate the Upper Line dial to the right one notch.
4.
Using the Lower Line dial, select the number of minutes to
operate.
To water selected stations:
1.
Turn the Function Selector dial to “Manual.”
2.
Using the Lower Line dial select Specific Stations.
3.
Rotate the Upper Line dial to the right until the desired station is
selected.
4.
Using the Lower Line dial, select the number of minutes to
operate.
Quick Reference Guide
86
