74 Hydro-View User Guide HD0531 Rev 2.0.0
10. Once the sensor Averaging is complete add the values to the chart.
11. The Average Unscaled for each available Measurement Mode is displayed on the
Calibration Screen.
Select the “Mode>” button to display each of the Measurement Mode data points.
12. Thoroughly mix the collected material to ensure the moisture is evenly distributed.
If the material is hot (above room temperature) store it in the sealed container
until it has fully cooled before starting any moisture checks.
13. Weigh a clean empty heat proof bowl.
150.00 g
14. Place a minimum of 500g of the material in the bowl. All other material must remain in
the air tight container until required.
15. Some materials, such as grain, might require grinding before analysis. If grinding is
required industrial standards should be followed using a suitable grinder.
16. Weigh the bowl and wet material
650.00 g
17. Heat the material in the microwave for approximately five minutes. Weigh the bowl
and record the result. Laboratory standards must be followed when heating especially
if the material is organic as high temperatures can cause other constituents of the
Summary of Contents for HV04
