54 Hydro-View User Guide HD0531 Rev 2.0.0
Electronics / Resonator / Material
These show the current temperatures being measured by the sensor. Depending on the
sensor type not all measurements may be available. These may be higher than the current
air temperature due to internal heating of the electronics.
Max / Min
These show the maximum and minimum temperatures experienced by the internal
electronics.
6.7.2
Sensor Status (1)
Figure 40: Sensor Status Page 1
Data Invalid
Shows red if the current Moisture or Unscaled readings are outside of the Average Include
ranges set on the Averaging Screen.
Digital In 1
Shows red if Digital Input 1 is active.
Digital I/O 2
Shows red if Digital Input 2 is active.
Too Cold
Shows red if the sensor is currently below 0
o
C, which could indicate that moisture readings
are not reliable.
Too Hot
Shows red if the sensor is too hot, which could be causing damage to the internal
electronics
6.7.3
Sensor Status (2)
Figure 41: Sensor Status Page 2
Summary of Contents for HV04
