6.
To change the view options, push . Select an option, then push
OK
.
Option
Description
Select Parameters
Sets the parameters that show on the graph (maximum of two). Push
OK
to select a
parameter.
Parameter Units
Sets the measurement units that show on the graph.
Step Size
Sets the number of data points the cursor (blue, vertical line) moves on the graph when
the LEFT and RIGHT arrows are pushed.
Go to Time
Moves the cursor to the date and time selected.
Zoom
Sets the measurement interval that show on the graph (1 second minimum).
Y-Axis Scale
Sets the minimum and maximum values of the Y-axis.
Line Weight
Sets the thickness (weight) of the lines in the graph.
Color
Sets the color of the graph lines.
Grid
Set the graph grid to on or off.
Log Details
Shows the log details.
7.
To look at the measurements on the graph for a specific date and time, push the
LEFT
or
RIGHT
arrow to move the cursor to the applicable date and time.
8.
To look at all the measurements for the selected date and time, push
OK
.
9.
Push to go out of the log file.
Copy the log files to a PC
Copy the log files to a PC as necessary to use the Hydrolab Operating Software to:
• Look at the log files
• Save the log files as comma-separated (.csv) text files
• Send the log files to a printer
1.
Connect the instrument to the PC. Refer to
2.
Click
Overview
in the navigation bar. A list of the log files kept on the instrument show in the right
pane.
3.
Select a log file, then click
Transfer
.
Note: To select more than one log file, use the Ctrl or Shift key.
4.
Select a folder on the PC, then click
Save
.
5.
When done, disconnect the instrument from the PC as necessary. Refer to
on page 23.
Connect to a PC
Items to collect:
• PC with Hydrolab Operating Software
• USB cable with mini-USB connector
1.
Set the instrument power to on.
2.
Connect the instrument to the PC with the supplied USB cable. Refer to
.
Note: The standard-size USB connection on the instrument is only for use with the communications modules.
No other USB devices are supported.
3.
At initial installation and each time a different USB port on the PC is used:
a.
Windows prompts that a new device is found and opens a wizard window. Select
No, not this
time
to search for software, then click
Next
.
22
English
Summary of Contents for Surveyor HL
Page 158: ...图 4 校准线缆或设置线缆连接 图 5 通信模块 USB 接口 连接 用户界面及导航 按键说明 请参阅 图 6 了解按键说明 158 中文 ...
Page 225: ......
