15
Rev. 08102020
1.
To position the lift in the center of a
10’
wide slip, the center of the dock bracket adjustment angle should be set at
19.5”
from the
dock finger. Mark this location. Increasing this to
25.5”
will center the lift in an
11’
wide slip, and
31.5”
will center it in a
12’
wide slip.
2.
The center to center of the two dock brackets in
81”.
3.
The forward edge of the C
-
Channel for the rear mooring brackets should be mounted at
16’
-
11”
from the header on the Short
Frame, or
18’
-
11”
on the Long Frame. Mark this location.
STEP 9: DOCK ATTACHMENT MEASUREMENTS
Dock Structure
Grip Tab
Grip Tab
1.
Attach Dock Brackets with the holes of the Vertical Angle aligned with the mark on the dock.
Note:
Grip Tabs must be installed to
reduce movement of the Lower Dock Bracket Angle. If grip tabs are not applicable, it will be necessary to
Through
-
Bolt
the Dock
Brackets to the dock structure to eliminate movement. Fasteners: 2 Grip Tabs per Dock Bracket—
(2
ea.) 1/2
-
13 x
1”
carriage bolt and
nut.
2.
Loosely
tighten the
20”
Dock Bracket Bolts.
It may be necessary to slightly adjust the position of the Dock Brackets when attaching
the hoist.
STEP 10: FRONT DOCK BRACKETS
Part #
Part Description
5049000
DOCK BRACKET
-
HEAVY DUTY CAST
Part #
Hardware Required
3041200
GRIP TAB
-
DOCK BRACKET
2090309
BOLT
-
CARRIAGE 1/2
-
13 X 1IN SHORT NECK GALV
2090111
NUT
-
HEX
-
1/2
-
13 GALV
Kit Box: # 1035916
Summary of Contents for Ultralift FM-6500LF
Page 1: ...1 Rev 08102020...
Page 21: ...21 Rev 08102020...
