8
Rev. 08102020
STEP 2: HULL PAD SUPPORTS (V
-
HULL)
The parts installed in the following steps may require adjustment to better fit the hull of the boat after initial lift. Accurate
measurements of the boats hull prior to assembly and careful attention to these steps may prevent having to re
-
position
the parts over the water.
If the boat is unable to be measured prior to assembly space the Hull Support Columns
36”
-
42”
apart at the rear of the hoist, with
the front Columns positioned
3”
narrower.
1.
Attach two Hull Support Columns to the front cross channel and two Hull Support Columns to the rear Cross channel. Attach
the columns with the flat side oriented as shown, and the brace angle of the column outboard. Fasteners per Column: (2 ea.)
1/2
-
13 x
1
-
1/2”
Bolt, (4ea.)
1/2”
Flat washers, (2ea.)
1/2”
Lock Washer, and (2ea.) 1/2
-
13 nuts.
Part #
Part Description
4031150
COLUMN
-
HULL SUPPORT UNIVERSAL RH/LH
Part #
Hardware Required
2090507
BOLT
-
HEX HEAD 1/2
-
13 X1
-
1/2 in. GALV
2090209
WASHER
-
FLAT 1/2 in. GALV
2090705
WASHER
-
LOCK 1/2 in. GALV
2090111
NUT
-
HEX
-
1/2
-
13 GALV
Kit Box: # 1035916
Summary of Contents for Ultralift FM-6500LF
Page 1: ...1 Rev 08102020...
Page 21: ...21 Rev 08102020...
