hydro-s 7029988, User And Service Manual

Page: 42 / 76

40
6.Operation
(1) Guide for operation
(2)Start the pool heat pump
Press to start the heat pump, the LED display will show the inlet water temperature and current working
mode after 5s.
(3) Stop the pool heat pump
Press once again to stop the heat pump, the LED display shows ‘OFF’
(4) Water temperature setting
Press or to set the desired water in temperature in current working mode, then Press to save
setting and exit.
(5)TIME setting
Press button ,then press to enter into “ TIME “ display ;
** HOUR SETTING**
Press again to “HOUR” setting , “HH” flashed ,then press or to adjust the HOUR from 0 to 23 ;
**MINUTE SETTING**
Press to enter into MINUTE setting ,”MM” flashed , then press or to adjust the MINUTE from 0 to
59.
(6) TIMER ON Setting
Press button ,then press button twice to enter into TIMER ON setting .When you see the starting time