HYDRO GUARD HG-3 LongNeck, User'S Operation Manual

Page: 18 / 24

Page 18 of 24
HG-3 Battery Replacement Instructions
Step 1
Loosen 4 security screws and remove ground plate and riser subassemblies.
Step 2
Use the handles to unclip the pipe subassembly and lift the internal components out
of the ground pipe.
Step 3
Unscrew the grey cap off the watertight housing and pull the battery box out of the
watertight housing. Replace 9-volt battery.
Step 4
Place the battery box back into the watertight pod housing and close the grey cap on
the watertight pod housing.
Step 5
Re-install the internal components and latch handles to the locked position.
Step 6
Replace ground plate and riser subassemblies and replace 4 security screws.