HYDRO GUARD HG-3 LongNeck, User'S Operation Manual

Page: 10 / 24

Page 10 of 24
Transmitting time, date and programs to programming interface, clearing/
checking programs, manual start
Connect handheld to programming interface using IR cable.
1) To transmit: from home screen, use DOWN ARROW to select “TBOS-II infra-
red” and press OK. TBOS-II handheld will receive data (settings) from built-in
programming interface.
2) Once data receipt is complete press RIGHT ARROW to move to “Settings” menu.
3) From “TBOS-II infra-red” settings screen select “Transmit” and press OK again.
When program to be transmitted appears, press OK to confirm.
4) To clear programs A, B, or C: from ”TBOS-II infra-red” welcome screen, use DOWN
ARROW to select “Clear Programs” and press OK, then select type of program to
clear and follow prompts.
5) To check programs A, B, or C: from ”TBOS-II infra-red” welcome screen, use
DOWN ARROW to select “Programs” and press OK, then select what is to be
checked and follow prompts.
Manual Flushing
Using TBOS-II handheld on the T-2 built-in programming interface (dark gray in color).
NOTE: Manual start cannot be initiated if there is no program in the programming
interface.
1) To start manual flushing from ”TBOS-II infra-red” welcome screen.
a) Use DOWN ARROW to select “Manual Watering” (Manual Flush) and press OK,
b) Select “Start Valve” (Open Control Valve) then using ON/OFF keys select “Valve 1”
and press OK,
c) Use ON/OFF keys to set the manual Flush Time (1 minute to 12 hours) and press
OK to confirm. Flushing will start after a four (4) second delay.
Stop Manual Flush Sequence
1) Reconnect IR cable to built-in interface, then hold down HOME key on handheld.
2) Use RIGHT ARROW to select “TBOS-II infra-red” menu and select “Manual Watering.”
3) Select “Cancel Irrigation” to cease the manual flush sequence.