HGM-C LSHT Wheel Motor
7
Gearwheel Set (17)
Cardan Shaft (15)
O-ring (18)
GEARWHEEL SET
Figure 9, Gearwheel Set
Disassembly
1. Remove castellated nut (1), woodruff key
(6), plastic plugs (8), retaining ring (2),
seven screws (22), seven washers (23), and
the end cover (19).
See pages 5 and 6
.
2. Remove the O-ring (18) and gearwheel set
(17). Discard O-ring (18).
See figure 9.
Note:
Placing fingers underneath gearwheel
set will help keep parts from falling
out.
3. Remove second O-ring (16), under gear-
wheel set, and discard.
4. Dismantle the gearwheel set for inspection
if contamination or damage is suspected.
Inspection
1. Inspect for wear or damage.
CARDAN SHAFT
Disassembly
1. Remove castellated nut (1), woodruff key
(6), plastic plugs (8), retaining ring (2),
seven screws (22), seven washers (23),
end cover (19), and the gearwheel set (17)
with O-rings (16, 18).
See figure 4 - 7
.
2. Remove the cardan shaft (15).
See figure 10.
Inspection
1. Check for wear and/or damage to the indi-
vidual splines on the cardan shaft (15).
Figure 10, Cardan Shaft
