HydraMaster Titan 575, Owner’S Manual And Maintenance Schedule

Page: 38 / 57

Titan 575 Owner’s Guide: 36
15. Remove the stainless steel plunger bolt and ceramic plunger from the plunger guide
(see Figure 9).
16. If the slinger washer is removed, be certain it is re-installed or replaced.
17. Separate plunger bolt from ceramic plunger (see Figure 9).
18. Install new Teflon
®
back-up ring and O-ring on the plunger bolt. Apply a film of O-ring
grease on the outside of the O-ring (see Figure 10).
19. Apply removable anaerobic thread sealant (Loctite
®
542) to the threads of the plunger
bolt, carefully pressing the plunger bolt into ceramic plunger (see Figure 10).
20. Slide new ceramic plunger over the plunger guide (see Figure 10).
21. Torque plunger to 14.5 ft. lbs.
Figure 9. Remove Stainless Steel Plunger Bolt and Ceramic Plunger
Figure 10. Install O-ring, Apply Sealant and Slide Plunger over Plunger Guide