HydraMaster CDS 4.6 Owner'S Manual Download Page 123

Page: 123 / 126

11-1: How to order Parts

11 - How to order Parts

To order warranty replacement parts or repairs, it is important that you read this section

which includes:

Warranty Parts orders

Parts orders

emergencies

one final Note

WARRANTY PARTS ORDERS

Call the local distributor where you purchased your equipment and ask for the

Service Department.

Have the following information ready:

equipment Model

Date of Purchase

Hours on the unit

unit Serial Number

Description of Malfunction

once it has been determined which parts are needed to correct the problem with

your machine, make arrangements with your distributor to either perform the repairs

or ship the parts to you.

PARTS ORDERS

Call your local distributor. In most instances, they either stock or have access to parts

through a regional service center.

EMERgENCIES

If, for any reason, your distributor is unable to supply you with the necessary parts, they

may call us and arrange for expedited shipping.

HydraMaster sells parts only through authorized distributors and service centers.

ONE FINAL NOTE

Any questions you have regarding the warranty program should be directed to the Customer

Service Department at (425) 775-7275, 8 a.m. to 5 p.m. Monday through friday (PST).

We shall always endeavor to be fair in our evaluation of your warranty claim and shall

provide you with a complete analysis of our findings.

HydraMaster warranty covers only defective materials and/or workmanship for the periods

listed. Diagnostic reimbursement is specifically excluded.

Summary of Contents for CDS 4.6































































































































Search results

Summary of Contents for CDS 4.6

Reviews:

HydraMaster CDS 4.6, Owner'S Manual, Page: 123 / 126

Search results

Summary of Contents for CDS 4.6

Reviews: